Wiser Smoke Alarm - Battery – Device user guide PDF
DUG_Smoke alarm DC_CLP-00

Wiser Smoke Alarm - Battery


CLP599WSAL
  1. For your safety
  2. About the device
    The Wiser Smoke Alarm – Battery (device) uses a photoelectric sensor to detect smoke generated by fire. It also includes a temperature sensor that detects heat caused by rapid increase in temperature. When connected to the Wiser system the device sends the notifications via the Wiser app.
  3. Installing the device
    Refer to the installation instruction supplied with this product.
  4. Pairing the device
    Using the Wiser app, pair your device with the Wiser Hub to access and control the device. You can either add the device manually or do an auto-scan to pair it.
  5. Setting up connection without Wiser system
  6. Testing the device
  7. Configuring the device
  8. Removing the device from the Wiser app
    You can remove a device from the device list using the Wiser app,
  9. Resetting the device manually
  10. Using the device
    The Control Panel of the smoke alarm allows you to view the current state of the device and allow you access the history and settings.
  11. Maintenance and cleaning
    A monthly inspection is recommended to help ensure the device is dust, dirt, and insect free. The device can be vacuumed (strongly recommended) or brushed with a soft brush to remove accumulated dust, dirt or kitchen grease. Apply a small amount of insect surface spray to a cloth and wipe around device(s) every 3 to 6 months to mitigate insect ingress..
  12. LED Indications
  13. Troubleshooting
  14. Technical Data
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?

Contact Information
Legal Information
Privacy Policy
Change your cookie settings