Uploading a Duplicate Configuration with a Local File

After saving the configuration for duplication on one Com’X, you can upload a duplicate configuration file to another Com’X:

Click the Maintenance main tab.
Click the System Settings subtab.
Click Browse in the Configuration Management collapsible menu.
Select the locally saved configuration file.
Saving the Configuration for Duplication on Another
Click Open for the selected file to appear.
Click Apply the configuration.
Wait for the Com’X to reboot.

The power LED turns green when the reboot is complete.
Reconnect to the Com’X.
Click Settings > Site Settings > Site Information.
Type the new site location name, then click Save changes to save the modification.

NOTE: The site location name may not include any of the following: '/:*?<>| or space.
Click the Device Settings tab.
Select the Com’X in the Device tree view.
Type the Com’X name in the General Properties collapsible menu.
Click Save changes to save your modification.
Click the Measurement table tab to check the correct connection, setting, and functioning on the new site.
Select Commissioning tab to activate logging and publication according to destination platform.
(see Commissioning for more information)