Search Results: Away Mode

Showing 181 - 190 of 272 results

Page 19 of 28

  • LED Indications in Quick Home Connect

    ELKO - SmartDim LED Puck Multiwire – Wiser Home Device User Guide

    LED Indications in Quick Home Connect LED Indications in Quick Home Connect LED Indications in Quick Home Connect Pairing the device in Quick Home Connect User Action LED Indication Status Press the push button 5 times in quick succession. LED blinks green, once per second. Pairing mode is active for 60 seconds. When pairing is completed, LED stops blinking.

  • LED Indications in Quick Home Connect

    ELKO - SmartSocket Single 16 A – Wiser Home Device user guide

    LED Indications in Quick Home Connect LED Indications in Quick Home Connect LED Indications in Quick Home Connect Pairing the device in Quick Home Connect User Action LED Indication Status Press the push button 5 times in quick succession. LED blinks green, once per second. Pairing mode is active for 60 seconds. When pairing is completed, LED stops blinking.

  • Creating a Moment

    ELKO - Smart ZB Thermostat 16 A – Wiser Home Device user guide

    to set the condition. For example, select heating. Set the required temperature using the slider (D). If you move the slider to the bottom of the bar, Frost Protection mode is activated. In this mode, the system maintains the room temperature at 5 °C. When the desired condition is set, tap Set. Once

  • Setting the threshold temperature

    ELKO - SmartBlinds Push – Wiser Home Device user guide

    Setting the threshold temperature Setting the threshold temperature Setting the threshold temperature Using the Wiser Home app, you can define the inside and outside temperature of a room above which the shutters shall close. To set the threshold inside and outside temperature: In the Seasonal Comfort Mode set-up page, tap Temperature. Set the inside and outside desired temperatures and tap Set.

  • Configuring the device

    ELKO - SmartDim Multiwire Universal LED Push – Wiser Home Device user guide

    of the device. B Location: Tap to assign the dimmer to any room (such as living room, bedroom, kitchen etc). For more information, refer to Setting the device location. C RL-LED Mode: You can improve the dimming quality in the app if you have problems with light flickering. Tap the toggle switch to

  • Creating a moment

    ELKO - Wiser 16 A Relay for Temperature Control – Wiser Home Device user guide

    device to set the condition. For example, select heating. Set the required temperature using sliding control (D). When you put the slider control (D) at the bottom of the bar for the moment, the Frost Protection mode is activated. In the frost protection mode, the system maintains the room temperature at

  • LED Indications in Quick Home Connect

    ELKO - SmartDim Multiwire Universal LED Push – Wiser Home Device user guide

    LED Indications in Quick Home Connect LED Indications in Quick Home Connect LED Indications in Quick Home Connect Pairing the device in Quick Home Connect User Action LED Indication Status Press the push button 5 times in quick succession. LED blinks green, once per second. Pairing mode is active for 60 seconds. When pairing is completed, LED stops blinking.

  • Creating a moment

    ELKO - Wiser Underfloor Heating Connection Strip – Wiser Home Device user guide

    device to set the condition. For example, select heating. Set the required temperature using sliding control (D). When you put the slider control (D) at the bottom of the bar for the moment, the Frost Protection mode is activated. In the frost protection mode, the system maintains the room temperature at

  • ELKO - Smart Plug 16 A

    of an automation Example of an automation In the example below, if away mode is enabled during Daytime, then Plug will turn off. Schneider Electric 35 rue Joseph Monier 92500 Rueil Malmaison France + 33 (0) 1 41 29 70 00 elko.no/contact www.se.com Editing an automation Editing an automation Schneider

  • Resetting the device manually

    ELKO - Smart Smoke Alarm Battery – Wiser Home Device user guide

    Resetting the device manually Resetting the device manually Resetting the device manually Short press (< 0,5 s) the Setup/Reset button 3 times and then long press the Setup/Reset button once for >10 s to reset the smoke alarm to factory default mode. All configuration data, user data and network data are deleted.
Page 19 of 28