Search Results: Away Mode

Showing 231 - 240 of 272 results

Page 24 of 28

  • Forstå prioriteringer i kontrollmodus

    Elko Wiser Home – Brukerveiledning for systemet (Norge)

  • Managing shutter operation without temperature sensor

    ELKO - SmartBlinds Push – Wiser Home Device user guide

    reference temperature: In the Seasonal Comfort Mode set-up page, tap Other room sensors. Wiser Home app displays the rooms without temperature sensors in list (A). Select a room from the list (A). You can use one of the following temperatures as a reference temperature for the selected room: Temperature

  • Configuring the device

    ELKO - SmartMove Dimmer Push – Wiser Home Device user guide

    the name of the device. B Location: Tap to assign the device to any room (such as living room, bedroom, kitchen etc). For more information, refer to Setting the device location. C RL-LED Mode: You can improve the dimming quality in the app if you have problems with light flickering. Tap the toggle

  • Technical data

    ELKO - Power Tag Control – Wiser Home Device User Guide

    voltage on output 230 V AC ± 20% Minimum/maximum current on output 10 mA / 2 A Type of output order Pulse or latch Pulse length in control mode with impulse relay Nominal: 300 ms (tolerance -0 ms, +300 ms) Radio-frequency communication ISM band 2.4 GHz 2.4 GHz to 2.4835 GHz Channels As per IEEE 802.15.4 11 to 26 Isotropic Radiated Power Equivalent (EIRP) 0 dBm Max. RF power transmitted ≤ 10 mW Channel occupancy On event Periodically (5 s nominal)

  • ELKO - SmartSensor Door/Win Wireless

    elko.no/contact www.se.com Setting the device location Setting the device location You can add your device to any room (such as bedroom, living room, dining room etc.). Schneider Electric 35 rue Joseph Monier 92500 Rueil Malmaison France elko.no/contact www.se.com Selecting the operating mode

  • Testing the device

    ELKO - Smart Smoke Alarm 230 V – Wiser Home Device user guide

    Testing the device Testing the device Testing the device The smoke alarm has a test mode that helps ensure the proper operation. It is recommended to test the smoke alarm once a month. If the smoke alarm is installed in a mobile home, it is recommended to test the smoke alarm weekly and before

  • LED indications

    ELKO - Wiser Underfloor Heating Connection Strip – Wiser Home Device user guide

    Hub Attempting to link with the Wiser Hub No connection with the Wiser Hub Blinking red Floor temperature exceeded LED of a channel Channels activated Heating / cooling LED Cooling mode Dew sensor activated Pump LED Pump activated Boiler LED Boiler activated Settings User action LED LED status

  • Configuring the device

    ELKO - SmartSwitch Push Wireless Plus – Wiser Home Device User Guide

    identification of the switch. Tap OK when you finish identifying the device. For more information, refer to Identifying the device. Before identifying the device, make sure it is awake. If the device is in sleep mode, wake it up. For more information, refer to Wake up the Wireless switch. D Delete: Tap to

  • Pairing two Pucks

    ELKO - SmartDim LED Puck Multiwire – Wiser Home Device User Guide

    -button. Refer to the below wiring diagram. You must put both pucks in a pairing mode at the same time. The pairing mode will be active for about a minute. HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Safe electrical installation must be carried out only by skilled professionals. Skilled

  • LED Indications

    ELKO - SmartSensor PIR wireless – Wiser Home Device user guide

    ) → → (3 sec) → Indicates the pairing mode after function key is pressed 3 times within 1 second. If pairing is not successful, the LED is On for 3 seconds and then turns Off. Green LED is On for 3 seconds → (3 sec) → Pairing was successful. If already paired Action LED Indication Status Green LED blinks
Page 24 of 28