Installation Procedure
NOTE: The illustrations in this manual shows installation
in a 700 mm empty battery cabinet. The battery breaker kit can also
be installed in a 1100 mm empty battery cabinet or a grounded metal
box.
Overview of Cables for Installations with One 700 mm Empty Battery Cabinet (GVEBC7) |
Overview of Cables for Installations with Two 700 mm Empty Battery Cabinets (GVEBC7) |
Overview of Cables for Installations with One 1100 mm Empty Battery Cabinet (GVEBC11) |
Overview of Cables for Installations with Two 1100 mm Empty Battery Cabinets (GVEBC11) |
 |
|
NOTE: The distance between the battery bank and the UPS must
not exceed 200 m. Contact Schneider Electric for installations with
a longer distance.
- Mount the battery breaker kit. Follow one of the procedures:
- Connect the Signal Cables.
- Connect the power cables, follow one of the procedures: