Prepare for Cables
hazard of electric shock, explosion, or arc flash
Do not drill or punch holes with the gland plates installed and do not drill or punch holes in close proximity to the cabinet.
Failure to follow these instructions will result in death or serious injury.
- Remove the bottom gland plates.
- Drill or punch holes for power cables and signal cables or grommets in the gland plates. UPS input (A), input (B), load (C), UPS output (D).
Install grommets (if applicable) and reinstall the gland
DANGERhazard of electric shock, explosion, or arc flashEnsure that there are no sharp edges that can damage the cables.Failure to follow these instructions will result in death or serious injury.