Configure the UPS Input

NOTE: This configuration is mandatory for correct UPS operation.
  1. Tap Configuration > UPS.
    1. Set the Mains configuration to Single mains or Dual mains.
    2. Select Autostart of the inverter if you want to enable this function.
      NOTE: When Autostart of the inverter has been enabled, the inverter will start up automatically when input voltage returns, after a shutdown due to drained battery.
    3. Set Transformer present to No transformer present, Input transformer, or Output transformer.
  2. Tap OK to save your settings.
QR code for this page

Was this helpful?