7EN02-0438-14

Com. Protection setting

For meters with communications capabilities, you can enable or disable the Com. Protection setting. If this setting is enabled, you must use the display to configure certain settings (for example, wiring or frequency, etc.) and perform resets; you cannot use communications.

The protected settings and resets are:

  • Power system settings (for example, wiring, frequency, CT ratios)

  • Date and time settings

  • Multi Tariff settings

  • Communications settings

  • Partial energy reset

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?