Analog output behavior

Your meter’s analog output, once configured, outputs voltage or current signals. If your meter’s analog output source becomes unavailable (N/A) the analog output level should go to zero (0 V/0 mA) under most conditions.

When your meter is powered off or configured to send voltage, the meter registers as a high impedance.

The electrical signal on the analog output is DC; make sure proper polarity is observed when wiring external devices to the analog output ports.

** Related Topics: “Configuring I/O option module analog inputs using ION Setup” and “Configuring option module analog outputs using ION Setup” See the ION Reference, available from www.schneider-electric.com, for more information about the Analog Input and Analog Output module settings.
QR code for this page

Was this helpful?