7EN02-0390-03

I/O overview

Your meter has onboard digital I/O which can be increased by adding optional digital and analog I/O modules to expand your meter’s I/O capabilities.

WARNING
UNINTENDED OPERATION
Do not use the meter for critical control or protection applications where human or equipment safety relies on the operation of the control circuit.
Failure to follow these instructions can result in death, serious injury, or equipment damage.

Your meter base has:

  • eight digital inputs

  • four form A digital outputs

  • two form C relays

  • kWh energy pulsing LEDs (one visible, one infrared)

  • kVARh energy pulsing LEDs (one visible, one infrared)

Include when RD gets pulsing working:

When you connect the RD192 remote display to the meter base, the same kWh and kVARh energy pulses are transmitted to the energy pulsing LEDs on the display.

You can view information about your meter’s I/O through the display and webpages, and configure your meter’s I/O using ION Setup.

QR code for this page

Was this helpful?