7EN02-0390-03

Configuring EtherGate using the display

Use the meter’s display to configure a serial port to use the EtherGate protocol.
  1. Press the Home button.
  2. Navigate to Setup Menu > Communications Setup.
  3. Press Select.
  4. Scroll then select COM1 Setup or COM4 Setup.
  5. Highlight the parameter and press Edit. Enter the meter password if prompted, change the setting, then press Select to save the changes.
    Parameter Setting

    Protocol

    EtherGate

    Baud Rate

    Serial Port

    Serial port settings must match the settings for all connected serial devices

You can use ION Setup to create an Ethernet gateway site and access the serial network of devices connected through the EtherGate meter.
QR code for this page

Was this helpful?