Creating custom displays using ION Setup
- Start ION Setup.
- Open the Setup Assistant for your meter.
- Navigate to Displays.
- Select Displays from the Front Panel tab and click Edit. ION Setup loads your meter’s display information into the Display Editor screen.
- Select the display mode of the custom screens from the
drop-down list, and rename, delete, or change the order of custom
displays.
- Click New to add a new display screen in the selected display mode.
- Click Edit to bring up the Display setup screen, where you can configure new or existing custom displays.
- Configure your screen.
-
Screen Type: Specify the number of parameters displayed on the screen.
-
Screen Title: Enter the title to be shown at the top of your custom display.
-
- Click Edit to select the displayed
parameters.The number of parameters displayed is determined in the Screen Type selection described above.
- Select your digit display properties.
-
Resolution: Specifies the number of decimal places displayed.
-
Last Digit: Specifies if the last digit is rounded or truncated.
-
- Click Send to save the changes in the meter.