7EN02-0390-03

Editing accumulated energy values using ION Setup

You can edit energy values such kWh and kVARh using ION Setup.
NOTE: Ensure you have recorded accumulated energy values before upgrading your meter’s firmware. You can then re-enter these values after the upgrade.
  1. Start ION Setup.
  2. Open the Setup Assistant for your meter.
  3. Select the Template screen.
  4. Click the Register Edit tab, click Energy then click Display. Enter your meter’s password (if prompted) and click OK.
    The Register Editor screen displays.
  5. Click Edit to enable editing.
  6. Enter values for kWh, kVAh and kVARh as required. Click Send to finish.
    NOTE: Only values that have the checkbox selected will be sent to the meter.
  7. Click Close to close the Register Editor screen.
QR code for this page

Was this helpful?