7EN02-0390-03

Putting your meter in test mode using ION Setup

You can put your meter into test mode using the ION Setup.
NOTE: You cannot place a revenue-locked meter into test mode.
  1. Start ION Setup.
  2. Open the Setup Assistant for your meter.
  3. Navigate to Verification and select the Verification tab.
  4. Select Test Mode and click Display.
    Your meter is now in test mode, and the Test Mode screen is displayed.
  5. Select the different tabs to view your meter’s test mode values and modify test mode parameters.
  6. Click Close to take your meter out of test mode.
QR code for this page

Was this helpful?