7EN02-0390-03

Revenue locking your meter

You can lock and unlock your meter using the revenue lock switch located on the meter base.
DANGER
hazard of electric shock, explosion or arc flash
  • Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices. See NFPA 70E in the USA, CSA Z462 or applicable local standards.
  • Turn off all power supplying this device and the equipment in which it is installed before working on the device or equipment.
  • Always use a properly rated voltage sensing device to confirm that all power is off.
Failure to follow these instructions will result in death or serious injury.
  1. Turn off all power supplying this device and the equipment in which it is installed before working on the device or equipment.
  2. Always use a properly rated voltage sensing device to confirm that all power is off.
  3. Open the revenue lock switch cover.
  4. Locate the revenue lock switch.
  5. Toggle revenue lock switch on or off.
  6. Close the revenue lock switch cover and make sure it is firmly in place.
  7. Seal the revenue lock switch cover if required.
QR code for this page

Was this helpful?