PowerLogic ION9000 series – User manual

Alarm configuration

  1. Alarm setup using the display
    You can enable and disable alarms through the display.
  2. Disabling and enabling alarms using the display
    You can disable alarms using the meter’s display when you are performing maintenance tasks on your system and want to prevent nuisance alarms.
  3. Configuring setpoint/standard alarms using ION Setup
    You can use ION Setup to configure the standard alarm settings.
  4. Sag/swell overview
    Your meter monitors your power system’s voltage and current for sags and swells (INCITS (CBEMA) Type 2 and Type 3 disturbances); it then reports the disturbance’s magnitude and duration.
  5. Configuring sag/swell alarms using ION Setup
    You can use ION Setup to configure the sag/swell alarm settings.
  6. Configuring transient alarms using ION Setup
    You can use ION Setup to configure the transient alarm settings.
  7. Configuring digital input alarms using ION Setup
    You can use ION Setup to configure the digital alarm settings.
Parent topic: Alarms and alerts
QR code for this page

Was this helpful?

Contact Information
Legal Information