7EN02-0336-07

Power quality standards compliance

Your meter is compliant with the following power quality standards.

IEC 61000-4-30

IEC 61000-4-30 power quality standard compliance is provided by ION modules including: Power Quality Aggregator, Harmonics Measurement, Disturbance Analyzer, Symmetrical Components, and Sag/Swell.

See the IEC 61000-4-30 compliance and ION meters technical note for details.

EN 50160

The EN 50160 framework includes ION modules, such as: Harmonics Evaluation and Voltage Harmonics.

Your meter’s framework is pre-configured for a low voltage system.

NOTE: Connect your meter to a UPS to avoid losing EN 50160 data in the event of a power outage.
See “EN50160 compliance logging (ION8650A and ION8650B only)” on page 166 for information on EN50160 parameter logging.

See the Power quality: ION meters and EN 50160:2010 technical note for details.

IEEE 519

The IEEE 519 framework includes ION modules, such as: Harmonics Evaluation, Harmonics Measurement and Counter.

See the IEEE 519 compliance and ION meters technical note for details. Only undraft this once technote is ready.

IEC 60255-24 (COMTRADE)

The meter provides waveforms in COMmon format for TRAnsient Data Exchange (COMTRADE) format. COMTRADE records are generated from the existing Waveform Recorder modules that are connected to the COMTRADE module.

See the COMTRADE and ION Technology technical note for details.

QR code for this page

Was this helpful?