Configuring EtherGate using the display

Use the display to configure a serial port to use the EtherGate protocol.
  1. Press the Home button.
  2. Navigate to Setup Menu > Communications Setup.
  3. Press Select.
  4. Scroll then select COM1 Setup.
  5. Highlight the parameter and press Edit. Enter the meter password if prompted, change the setting, then press Select to save the changes.
    Parameter Setting



    Baud Rate

    Serial Port

    Serial port settings must match the settings for all connected serial devices

You can use ION Setup to create an Ethernet gateway site and access the serial network of devices connected through the EtherGate meter.
QR code for this page

Was this helpful?