Configuring EtherGate using ION Setup

Use ION Setup to configure EtherGate communications on your meter.
  1. Start ION Setup.
  2. Open the Setup Assistant for your meter.
  3. Navigate to Communications > Serial settings.
  4. Select Com1.
  5. Highlight the parameter and click Edit. Enter the meter password if prompted, change the setting, then click OK to save the changes.
    Parameter Setting



    Baud Rate

    Serial Port

    Serial port settings must match the settings for all connected serial devices

  6. Create an Ethernet gateway site to access the serial network of devices through your gateway meter.
QR code for this page

Was this helpful?