Showing 41 - 50 of 387 results

Page 5 of 39
  • Insights

    Elko Wiser Home – System User Guide (Norway)

    Insights Insights Insights The Insights provides information on the annual bill for the tariff set. It helps to keep track of your energy. The option to set a tariff is only available if you have an Energy device installed in your home. For more information, please refer to the Device User Guide of
  • Setting alarms

    ELKO - Smart Water Heater Puck – Wiser Home Device User Guide

    Setting alarms Setting alarms Setting alarms Using Wiser Home app, you can set alarms to notify overconsumption or no consumption of loads. Each device can have one overconsumption and one no consumption alarm.To configure alarms: On Home screen, tap . Tap Account Notifications and Alarms Create a
  • Room setting

    ELKO - Smart ZB Thermostat 16 A – Wiser Home Device user guide

    Room setting Room setting Room setting You can set channel, occupancy and window detection in the room settings. On the Control tab, select the thermostat for which you want to change room setting. On device control screen of thermostat, tap Room setting to open room details. Channel settings If
  • Konfigurering - (høyeste/laveste) sats

    Elko Wiser Home – Brukerveiledning for systemet (Norge)

    Konfigurering - (høyeste/laveste) sats Konfigurering - (høyeste/laveste) sats Konfigurering - (høyeste/laveste) sats For å angi høyeste sats: Etter å ha lest informasjonen om innføring av tariff. På skjermen Tariff trykker du på Elektrisitet. Hvis du allerede har konfigurert tariffinnstillingene
  • ELKO - Smart Plug 16 A

    the icon and reassigning the equipment type Changing the icon and reassigning the equipment type You can change the icon of the device. Schneider Electric 35 rue Joseph Monier 92500 Rueil Malmaison France + 33 (0) 1 41 29 70 00 elko.no/contact www.se.com Setting the device location Setting the
  • Wiser Home AI

    ELKO - Smart Water Heater Puck – Wiser Home Device User Guide

    enrolling devices like EV chargers or resistive water boilers, this feature shifts loads to low-tariff periods. It also helps the EV chargers to consume the excessive solar energy production. It works with variable tariffs, such as peak/off-peak rates, and requires users to answer routine questions. For more information on Wiser Home AI refer to the respective System User Guide.
  • Setting Brightness level

    ELKO - SmartDim LED Puck Multiwire – Wiser Home Device User Guide

    Setting Brightness level Setting Brightness level Setting Brightness level Using the Wiser Home app, you can set the minimum and maximum brightness level. On the Home screen, tap . Tap Devices > Micromodule Dimmer. Drag the slider bar to increase or decrease the Minimum Brightness and Maximum Brightness (A).
  • Setting device notification

    ELKO - SmartSensor Leakage Wireless – Wiser Home Device user guide

    Setting device notification Setting device notification Setting device notification Using the Wiser Home app, you can enable or disable the sensor notification. On the Home screen, tap . Tap Devices Water Leakage Sensor Notify me if leak is detected (A) to enable or disable the sensor notification
  • Setting detection delay

    ELKO - SmartSensor PIR wireless – Wiser Home Device user guide

    Setting detection delay Setting detection delay Setting detection delay Detection delay is the time taken by the sensor to respond after motion is detected. On the Home screen, tap . Before applying the new settings, please wake up the sensor (press the function key or simulate the motion). Tap
  • Setting Dimming Mode

    ELKO - SmartDim LED Puck Multiwire – Wiser Home Device User Guide

    Setting Dimming Mode Setting Dimming Mode Setting Dimming Mode Using the Wiser Home app, you can manage the Dimmer modes and settings. On the Home screen, tap . Tap Devices > Micromodule Dimmer > Dimming Mode (A) and select either of the following options and tap Done. RC Mode: When different
Page 5 of 39