Inputs

Electrical Measurements

The following electrical measurements are collected at each point of interest in the electrical distribution, from Medium Voltage, to Low Voltage, down to Final Distribution.

• Power values (kW, kVAR, kVA)

• Energy values (kWh, kVARh, kVAh)

These data may be acquired from:

• Power/energy meters such as PowerLogic ION9000, PM8000, PM5000, HDPM6000, PowerTag, Acti9 iEM3000

  PowerLogic ION9000	PowerLogic PM8000	PowerLogic PM5000

  PowerLogic HDPM6000	Acti9 iEM3000	PowerLogic PowerTag

• Devices with embedded metering such as PowerLogic P5/P3, MasterPacT MTZ, and ComPacT NSX protection devices, or Galaxy VX/VL/VM/VS UPS

  PowerLogic P5	PowerLogic P3	MasterPacT MTZ	ComPacT NSX	Galaxy VX/VL/VM/VS

• Third-party devices (via Modbus)

Other Utility Consumption Inputs

The following utilities can be monitored:

• Water

• Air

• Gas

• Steam or heat flow

They can be acquired via digital/analog inputs on meters or directly via Modbus from third-party devices.

Metering Hierarchy (User Input)

Metering hierarchy correlates tenants, areas, departments, or buildings with the appropriate metering devices.

Tariffs (User Input)

To convert energy consumption into cost, you need to configure the rate file for all relevant tariffs.