Exxact - Connected Relay Switch 10 A – Device user guide PDF
DUG_Exxact - Relay Switch_WSE-00

Exxact - Connected Relay Switch 10 A


WDE00x348

  1. For your safety
  2. About the device
    The Connected Relay Switch 10 A (hereinafter referred to as Relay Switch) is a push button device that can be used to switch LED, ohmic, inductive or capacitive loads manually or remotely.
  3. Installing the device
    Refer to the installation instruction supplied with this product.
  4. Quick Home Connect
    Quick Home Connect is a wireless connectivity solution for Zigbee devices without the need for a Hub/Gateway or smartphone application. Quick Home Connect is your starting point for wireless home automation. It performs functions like switching, dimming and shutter control using the Connected Wireless Switch (hereinafter referred to as Wireless switch) via a Zigbee network.
  5. Pairing the device with the Wiser Gateway
    Using the Wiser app, pair your device with the Gateway/Hub to access and control the device. You can either add the device manually or do an auto-scan to pair it.
  6. Configuring the device
  7. Removing the device
    Using the Wiser app, you can remove a device from the device list.
  8. Resetting the device
    You can reset the device to factory default manually.
  9. Using the device
    The Control Panel allows you to switch the turn on/off the relay switch and control various settings.
  10. LED Indication
  11. Technical Data
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?

Contact Information
Legal Information
Privacy Policy
Change your cookie settings