Search Results: SETTING TARIFF

Example of an automation

Wiser Flush-mounted Thermostat 2 A – Wiser Home Device user guide

Example of an automation Example of an automation Example of an automation This demonstration guides you through setting up an automation that activates heating to a set temperature of 20 °C when the room temperature drops below 18 °C. To ensure proper heating control, you must create two separate

PowerTag Control

France + 33 (0) 1 41 29 70 00 www.se.com Configuring the device Configuring the device Using the Wiser Home app, you can configure the device according to your preferences. Schneider Electric 35 rue Joseph Monier 92500 Rueil Malmaison France + 33 (0) 1 41 29 70 00 www.se.com Setting the device location

Pairing the device with the Wiser Hub

System M and System D - Connected Push-button Module, 1-gang/2-gang – Wiser Home Device user guide

slats: Proceed to step 8 and step 10. Tap Shutter Next and enter the open/close duration of shutter. Refer to Setting default run time. Tap Shutter with tilting slats Slat Type, select a slat type and tap Set: Horizontal Tilted Vertical Tap Next and enter the following durations: Open duration

LED indications

Ovalis - Connected Single Socket Outlet 16 A – Wiser Home Device user guide

. Setting (Default state) LED Indication Description The Red LED glows. The Red LED glows when the output is switched ON. All the LEDs are OFF. The LEDs are OFF, when the output is OFF. Alarms LED Indication Description Blinking red fast When there is an overload or over-temperature alarm and the device is switched off. Refer to the Troubleshooting to clear the alarms.

Creating a moment

Unica - Connected Relay Switch 10 A – Wiser Home Device user guide

actions menu, you can select the devices (C). Once devices are selected, tap Done. On the Moment creator page, tap the device to set the condition. For example, if it is a relay switch: Tap to turn on (D) and tap Set on the top-right screen. After setting all conditions, tap Save. Once the moment is

About the device

System M and System D - Connected Thermostat 16 A, ZB – Wiser Home Device user guide

heating. The thermostat consists of: Connected Thermostat Insert 16 A (MEG5777-0001) Frame Connected Thermostat Module, ZB (MEG5779-0xxx, MEG5779-60xx) The insert works with several floor sensor types. Refer floor sensor setting. The room air temperature sensor is included with the Connected

Creating a moment

Exxact - Connected Relay Switch 10 A – Wiser Home Device user guide

actions menu, you can select the devices (C). Once devices are selected, tap Done. On the Moment creator page, tap the device to set the condition. For example, if it is a relay switch: Tap to turn on (D) and tap Set on the top-right screen. After setting all conditions, tap Save. Once the moment is

Creating a moment

LK FUGA® Wiser wireless PIR with relay – Wiser Home Device user guide

actions menu, you can select the devices (C). Once devices are selected, tap Done. On the Moment creator page, tap the device to set the condition. For example, if it is a Motion Sensor Switch: Tap to turn on (D) and tap Set on the top-right screen. After setting all conditions, tap Save. Once the

Creating a moment

LK FUGA® Wiser wireless double relay – Wiser Home Device User Guide

actions menu, you can select the devices (C). Once devices are selected, tap Done. On the Moment creator screen, tap the device to set the condition. For example, if it is a relay switch: Tap to turn on (D) and tap Set on the top-right screen. After setting all conditions, tap Save. Once the moment is

Example of an automation

Same topic found multiple times in this document:

Example of an automation This demonstration guides you through setting up an automation that activates heating to a set temperature of 20 °C when the room temperature drops below 18 °C. To ensure proper heating control, you must create two separate automations: Automation 1: Boost the heating when