5230CT9601

Accessories

NOTE: All part numbers shown are for use with trench duct that is adjustable from 2.37–3.37 in. (61–86 mm). For devices to be used with 3–4 in. (76–102 mm) adjustable trench, add -3 suffix to all part numbers shown.

U-Compartment

U-Compartment

Legend—U-Compartment

A Plastic sound dampeners
B Temporary 10–24 in. holding screw for adjustable partitions

U-Compartment Weight

Catalog Number Weight
Lbs. Kg.

RUC60

24 11

Z-Divider

Z-Divider

Legend—Z-Divider

A Plastic sound dampeners
B Temporary holding screw for adjustable partitions

Z-Divider Weight

Catalog Number Weight
Lbs. Kg.

RZD60

10 5

Support Post Strip

Support Post Strip

Legend—Support Post Strip

A Support post screw
B Lock nut

Support Post Strip Weight

Catalog Number Weight
Lbs. Kg.

RSP60

6 3

Panel Rise and Connector

Panel Rise and Connector

RRC09

Panel Rise and Connector Dimensions

Catalog Number Width
in. mm

RRC06

2 51

RRC09

5 127

RRC12

8 203

RRC18

14 356

RRC24

20 508

RRC30

26 660

End Closure

End Closure

REC09

End Closure Dimensions

Catalog Number Width
in. mm

REC06

6.50 165

REC09

9.50 241

REC12

12.50 318

REC18

18.50 470

REC24

24.50 622

REC30

30.50 775

Leveling Legs

Leveling Legs

Leveling Legs Weight

Catalog Number Description Weight
Lbs. Kg.

G19103

3 in. (76 mm) Leveling Leg for Support Channel

0.21 0.09

Trench Duct Support Channel

Trench Duct Support Channel

Trench Duct Support Channel Weight

Catalog Number Description Weight
Lbs. Kg.

G1500T12

Support channel for 9 in. (229 mm) and 12 in. (305 mm) wide trench 1.30 0.60

G1500T24

Support channel for 18 in. (457 mm) and 24 in. (610 mm) wide trench

2.00 0.90

G1500T36

Support channel for 30 in. (762 mm) wide trench

2.90 1.30

Tape

Tape Weight

Catalog Number Description Weight
Lbs. Kg.

G1414

2 in. (51 mm) Wide for Trench Cover Plate (180 ft./roll) (54864 mm/roll) 1.20 0.50

Plastic Grommets

Plastic Grommets

Plastic Grommets Weight

Catalog Number Description Weight
Lbs. Kg.
G1472–2.5P 2.5 in. (64 mm) Diameter Grommet 0.03 0.01
G1472–3P 3 in. (76 mm) Diameter Grommet 0.03 0.01
G1472–4P 4 in. (102 mm) Diameter Grommet 0.04 0.02
G1472–36P 3 x 6 in. (76 x 152 mm) Grommet 0.04 0.02
G1472–37P 3 x 7 in. (76 x 178 mm) Grommet 0.05 0.02
RG50 50 ft. (15.24 m) Roll 2.00 0.90

Cover Lifter

Cover Lifter

Cover Lifter Weight

Catalog Number Description Weight
Lbs. Kg.

G1735S

Cover Lifter (Suction Cup Device)

2.20 1.00

Straight Through Tunnel

Straight Through Tunnel

Straight Through Tunnel Weight

Catalog Number Description Weight
Lbs. Kg.

RSV122ST

Straight tunnel for 12 x 2.5 in. (305 x 64 mm) floor trench tee or cross 2.90 1.32

RSV182ST

Straight tunnel for 18 x 2.5 in. (457 x 64 mm) floor trench tee or cross

3.80 1.73

90° Elbow Tunnel

90° Elbow Tunnel

90° Elbow Tunnel Weight

Catalog Number Description Weight
Lbs. Kg.

RSV122ET

90° tunnel for 12 x 2.5 in. (305 x 64 mm) floor trench tee or cross 3.20 1.45

RSV182ET

90° tunnel for 18 x 2.5 in. (457 x 64 mm) floor trench tee or cross 5.10 2.32

Cross Section—Details of Trench Duct Side Rail and Cover

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?