Showing 151 - 160 of 272 results

Page 16 of 28
  • About the device

    ELKO - SmartDim LED Puck Multiwire – Wiser Home Device User Guide

    mechanical push-buttons. Setting the LED operating mode manually (RL LED mode). Electronic overload protection, overheating protection, and short-circuit protection. Setting the dimming range: minimum and maximum brightness. Setting a time schedule with the Wiser app.
  • LED Indications

    ELKO - SmartSensor Door/Win Wireless – Wiser Home Device user guide

    LED Indications LED Indications LED Indications Pairing User Action LED Indication Status Press the function key 3 times LED blinks amber, once per second. Pairing mode is active for 30 seconds. When pairing is completed, LED glows green for some time before turning Off. Resetting User Action LED
  • LED Indications

    ELKO - Smart Water Heater Puck – Wiser Home Device User Guide

    LED Indications LED Indications LED Indications Pairing User Action LED Indication Status Press the Setup/Reset button 3 times Status LED blinks yellow, once per second. Pairing mode is active for 30 seconds. When pairing is completed, status LED glows green for some time before turning Off
  • LED Indication

    ELKO - SmartBlinds Push – Wiser Home Device user guide

    LED Indication LED Indication LED Indication Pairing User Action LED Indication Status Press the push button 3 times LED blinks amber per second. Pairing mode is active for 30 seconds. When pairing is completed, LED glows green for some time before turning off. Resetting User Action LED Indication
  • eSetup App

    Elko Wiser Home – System User Guide (Norway)

    for Electricians App you can, Commissioning of Wiser products with step by step guidance See the complete installation in DEMO Mode (no need of actual devices) Define the system and settings of the devices Verify and test the installation Get connected to Bluetooth or Wifi to the product directly
  • Migration from Wiser Energy to Wiser Home

    Elko Wiser Home – System User Guide (Norway)

    firmware version will be printed on the device or can be provided by customer support), enable the Legacy PowerTag Energy mode toggle switch on the Wiser Hub’s Device Details screen to allow the system to pair with them. On the Home screen of the Wiser Home app, tap . Tap Devices > Hub 2 nd Gen to navigate to the Device Details screen. Tap the toggle switch and enable the Legacy PowerTag Energy mode to commission the old PowerTag.
  • About the device

    ELKO - Wiser Room Thermostat – Wiser Home Device user guide

    information such as (room temperature, relative humidity, battery level, boost status, heating symbol, and signal status). On the Room Thermostat screen, icon changes and appears when the room is in Comfort Mode and when the room is in ECO Mode. For more information, refer to the System User Guide
  • LED indications

    ELKO - SmartSensor Climate Wireless – Wiser Home Device user guide

    LED indications LED indications LED indications Pairing User Action LED Indication Status Press the function key 3 times LED blinks amber, once per second. Pairing mode is active for 30 seconds. When pairing is completed, LED glows green for some time before turning Off. Resetting User Action LED
  • LED Indications

    ELKO - SmartSensor Leakage Wireless – Wiser Home Device user guide

    LED Indications LED Indications LED Indications Pairing User Action LED Indication Status Press the function key 3 times LED blinks amber , once per second. Pairing mode is active for 30 seconds. When pairing is completed, LED glows green for some time before turning Off. Resetting User Action LED
  • LED indication

    ELKO - SmartDim LED Puck Multiwire – Wiser Home Device User Guide

    LED indication LED indication LED indication Pairing the device User Action LED Indication Status Short press the setup/reset button or push button 3 times. Short press the set (setup/reset) button or push button 3 times. LED blinks orange once per second. Pairing mode is active for 30 seconds
Page 16 of 28