Search Results: Away Mode
Showing 201 - 210 of 251 results
-
Setting the room temperature using the app
ELKO - Smart Radiator Thermostat – Wiser Home Device user guide
bottom of the bar activates Frost Protection mode. In this mode, the system maintains the room temperature at a constant 5 °C to prevent freezing. You can also adjust the room temperature: By tapping or on the Control tab, in the Heating section of the concerned room to adjust its temperature. If you -
Changing the orientation of outside temperature sensors
ELKO - SmartBlinds Puck – Wiser Home Device user guide
temperature sensors: In the Seasonal Comfort Mode set-up page, tap Outside temp sensors. Tap to see the available outside temperature sensors in Wiser Home app. Select the orientation in which the outside temperature sensors are facing and tap Set. -
Resetting the device
ELKO - Smart Water Heater Puck – Wiser Home Device User Guide
Resetting the device Resetting the device Resetting the device You can reset the device to factory default manually. Short press ( <0,5 s) the Setup/Reset button 3 times and then long press the Setup/Reset button once for 10 s to reset the Water heater to factory default mode. orShort press the -
Setting the room temperature using the app
ELKO - Wiser 16 A Relay for Temperature Control – Wiser Home Device user guide
the slider control to the bottom of the bar activates Frost Protection mode. In this mode, the system maintains the room temperature at a constant 5 °C to prevent freezing. When you add it to your Favourites. To know more about Favourite, refer to the Managing Favourite topic in the respective System -
Changing the shutter orientation and location
ELKO - SmartBlinds Puck – Wiser Home Device user guide
Mode set-up page, tap Shutters. Update the orientation of the shutters and tap Set. If any shutter is covering a door, tap Yes I have shutters over a door to define its location. If no shutters cover a door, tap No. Select the shutters covering the doors from the list (A) and tap Finish. -
Changing the shutter orientation and location
ELKO - SmartBlinds Push – Wiser Home Device user guide
Mode set-up page, tap Shutters. Update the orientation of the shutters and tap Set. If any shutter is covering a door, tap Yes I have shutters over a door to define its location. If no shutters cover a door, tap No. Select the shutters covering the doors from the list (A) and tap Finish. -
Setting the room temperature using the app
ELKO - Wiser Underfloor Heating Connection Strip – Wiser Home Device user guide
scheduled event or to the previous set-point temperature. Moving the slider control to the bottom of the bar activates Frost Protection mode. In this mode, the system maintains the room temperature at a constant 5 °C to prevent freezing. The indicates that the room temperature is below the desired -
ELKO Smart Tag Wiser Home Device User Guide
automation– Any condition: Any one of the condition must be met to trigger an automation. 5. Tap Add conditions (C) and select any of the following (D): – Device status change (Select the device)– Away Mode (Enable or Disable)– Energy Price changes (To define the energy price limit) NOTE: This condition is -
Connecting to the Hub's Temporary Wi-Fi® Network
Elko Wiser Home – System User Guide (Norway)
: Select your Hub. If you have logged in as a Professional Installer, the app checks for the latest firmware. If the hub is not on the latest version, you will be prompted to update before proceeding with the setup. Put the Hub into setup-mode. The method of putting the hub into setup-mode is