Search Results: Away Mode

Showing 221 - 230 of 272 results

Page 23 of 28

  • Resetting the device

    ELKO - SmartBlinds Puck – Wiser Home Device user guide

    Resetting the device Resetting the device Resetting the device You can reset the device to factory default manually. Short press ( <0,5 s) the Setup/Reset button 3 times and then long press the Setup/Reset button once for 10 s to reset the Puck to factory default mode. or Short press the push

  • ELKO Smart Tag Wiser Home Device User Guide

    automation– Any condition: Any one of the condition must be met to trigger an automation. 5. Tap Add conditions (C) and select any of the following (D): – Device status change (Select the device)– Away Mode (Enable or Disable)– Energy Price changes (To define the energy price limit) NOTE: This condition is

  • Setting the room temperature using the app

    ELKO - Wiser Underfloor Heating Connection Strip – Wiser Home Device user guide

    scheduled event or to the previous set-point temperature. Moving the slider control to the bottom of the bar activates Frost Protection mode. In this mode, the system maintains the room temperature at a constant 5 °C to prevent freezing. The indicates that the room temperature is below the desired

  • Managing shutter operation without temperature sensor

    ELKO - SmartBlinds Puck – Wiser Home Device user guide

    reference temperature: In the Seasonal Comfort Mode set-up page, tap Other room sensors. Wiser Home app displays the rooms without temperature sensors in list (A). Select a room from the list (A). You can use one of the following temperatures as a reference temperature for the selected room: Temperature

  • About the device

    ELKO - Smart Radiator Thermostat – Wiser Home Device user guide

    provide ultimate comfort, convenience and practicality. Intended use: Individual room control Mobile control anytime, anywhere with the Wiser Home app Boost mode for ease and comfort. Diagram of operating elements 3 status LEDs Twistable cap Chrome ring nut.

  • Forstå prioriteringer i kontrollmodus

    Elko Wiser Home – Brukerveiledning for systemet (Norge)

  • Configuring the device

    ELKO - SmartMove Dimmer Push – Wiser Home Device user guide

    the name of the device. B Location: Tap to assign the device to any room (such as living room, bedroom, kitchen etc). For more information, refer to Setting the device location. C RL-LED Mode: You can improve the dimming quality in the app if you have problems with light flickering. Tap the toggle

  • Managing shutter operation without temperature sensor

    ELKO - SmartBlinds Push – Wiser Home Device user guide

    reference temperature: In the Seasonal Comfort Mode set-up page, tap Other room sensors. Wiser Home app displays the rooms without temperature sensors in list (A). Select a room from the list (A). You can use one of the following temperatures as a reference temperature for the selected room: Temperature

  • LED indication

    ELKO - Schneider Charge – Wiser Home Device User Guide

    access point activated for commissioning Blinking Blue Pairing mode with anti-tripping module (peak controller) activated Blinking Red Anti-tripping module power line communication or TIC communication (France only) lost

  • Setting LED brightness

    ELKO - Smart Smoke Alarm 230 V – Wiser Home Device user guide

    Setting LED brightness Setting LED brightness Setting LED brightness You can change the LED brightness to minimum and maximum manually and also using the Wiser Home app. Changing the LED brightness manually When the smoke alarm is in standby mode, short press the Test/Hush button 3 times within 2 s
Page 23 of 28