Wireway
Refer to Busway and Cable Management Online
General Purpose—NEMA Type 1
For more information on Wireway, refer to Catalog 5100CT0101.
Standards
Square-Duct wireway is Underwriters Laboratories listed as steel enclosed wireway and auxiliary gutter. CSA listing is also available.
|
Painted Hinge-Cover Type LDB—ANSI 49 Gray Polyester Powder Finish |
Sizes
2-1/2”, 4”, and 6” sizes are manufactured from 16 gauge steel. Straight lengths are available with or without knockouts. Knockouts are of various sizes in sides and bottom of wireway. 8”, 10”, and 12” sizes are made of 14 gauge steel and are furnished without knockouts.
General Purpose (Connectors not supplied; order separately) [1] [2] [3]
|
Component |
2-1/2" x 2-1/2" |
4" x 4" |
6" x 6" |
8" x 8" |
10" x 10" |
12" x 12"[4] |
|||
|---|---|---|---|---|---|---|---|---|---|
|
Catalog Number |
Catalog Number |
Catalog Number |
Cat. No. |
Cat. No. |
Cat. No. |
||||
|
With Knockouts |
Without Knockouts |
With Knockouts |
Without Knockouts |
With Knockouts |
Without Knockouts |
Without Knockouts |
Without Knockouts |
Without Knockouts |
|
|
1' Length |
|||||||||
|
2' Length |
|||||||||
|
3' Length |
|||||||||
|
4' Length |
|||||||||
|
5' Length |
|||||||||
|
6' Length |
— |
— |
— |
||||||
|
10' Length |
|||||||||
|
90o L |
— |
— |
— |
||||||
|
90o Sweep L |
— |
— |
— |
||||||
|
45o L |
— |
— |
— |
||||||
|
Tee |
— |
— |
— |
||||||
|
Junction Box |
— |
— |
— |
||||||
|
Telescope Ftg. |
— |
— |
— |
||||||
|
Connector[3] |
— |
— |
— |
||||||
|
Drop/Brkt Hgr. |
— |
— |
— |
||||||
|
Support Hanger |
— |
— |
— |
||||||
|
Closing Plate |
|||||||||
|
Panel Adapter |
— |
— |
— |
||||||
|
Open Adapter |
— |
— |
— |
||||||
|
Reducer |
— |
— |
— |
— |
|||||
|
— |
— |
— |
— |
— |
— |
— |
— |
||
|
Adapter |
— |
— |
— |
— |
|||||
|
Barrier
Kit—5 ft. |
— |
— |
— |
— |
— |
— |
|||
|
5 pc.
Barrier |
— |
— |
— |
— |
— |
— |
— |
||
|
5 pc.
Barrier Bracket— |
— |
— |
— |
— |
— |
— |
— |
||
|
5 pc.
Barrier |
— |
— |
— |
— |
— |
— |
— |
||
Oiltight—NEMA Type 12
Type LJB Oiltight lay-in wireway is fully gasketed and used
to protect runs of electrical wiring from oil, water, coolants, dirt,
or dust as well as physical damage. This wireway is manufactured to
exceed oiltight and NFPA standards for industrial control equipment.
Lengths and fittings are made of 14 gauge steel with 10
gauge end flanges. Straight lengths and fittings have hinged covers
with oil resistant gasket all around and are held closed with pull-down
latches. All lengths and fittings are without knockouts. Type LJB
lay-in Wireway is finished with ANSI-49 gray polyester powder finish
over a corrosion resistant phosphate preparation. All Type LJB oiltight
wireway is UL listed as steel enclosed wireway and auxiliary gutter.
Conforms to NEMA Type 12.
Type LJB Lay-in [1] [7]
|
Description |
2-1/2" x 2-1/2" |
4" x 4" |
6" x 6" |
8" x 8" |
12" x 6" |
|---|---|---|---|---|---|
|
Catalog No. |
Catalog No. |
Catalog No. |
Catalog No. |
Catalog No. |
|
|
1" Nipple |
— |
— |
|||
|
2" Nipple |
— |
— |
|||
|
3" Nipple |
— |
— |
|||
|
6" Length |
|||||
|
1' Length |
|||||
|
2' Length |
|||||
|
3' Length |
|||||
|
4' Length |
|||||
|
5' Length |
|||||
|
10' Length [8] |
|||||
|
45o Top Opening |
|||||
|
45o Inside Opening |
— |
||||
|
45o Outside Opening |
— |
||||
|
90o Inside Opening |
|||||
|
90o Outside Opening |
|||||
|
90o Outside Top Opening |
— |
— |
|||
|
90o Top Opening |
|||||
|
Tee—Top Opening |
|||||
|
Tee—Outside Opening |
— |
||||
|
Cross |
|||||
|
Junction Box |
— |
||||
|
Telescopic Fitting |
|||||
|
Closing Plate |
|||||
|
Panel Adapter |
|||||
|
Bracket Hanger |
— |
||||
|
Drop Hanger |
— |
||||
|
Extra Connector Kit [7] |
|||||
|
90o Connector |
|||||
|
Reducer to 2" |
— |
— |
— |
— |
|
|
Reducer to 4" |
— |
— |
— |
||
|
Reducer to 6" |
— |
— |
— |
||
|
Cut-off fitting—not Lay-in |
|||||
|
Cut-off fitting—Lay-in |
|||||
|
Transposition Fitting—CCW (Str) |
— |
— |
|||
|
Transposition Fitting—CW (Str) |
— |
— |
|||
|
Transposition Elbow—CCW |
— |
||||
|
Transposition Elbow—CW |
— |
||||
|
Swivel fitting—Wireway to Wireway |
— |
||||
|
Swivel fitting—Wireway to Box |
— |
||||
|
Flex Fitting—Feed Through |
— |
||||
|
Barrier Kit—5 ft. long w/hardware |
— |
||||
|
5 pc. Barrier Pack—5 ft. long |
— |
— |
— |
||
|
5 pc. Barrier Bracket—2 compartment |
— |
— |
— |
||
|
5 pc. Barrier Bracket—3 compartment |
— |
— |
— |
Raintight Wireway—NEMA Type 3R
Outdoor raintight wireway is used to protect electrical wiring against rain, sleet, and physical damage. Unique drip shield cover protects wiring from weather and maintains the “lay-in” feature for ease of wiring installation. Lengths and fittings are constructed of 16 gauge galvanized steel with ANSI-49 gray polyester powder finish over a corrosion resistant phosphate preparation. Underwriters Laboratories Listed as steel enclosed wireway and auxiliary gutter (horizontal mounting only). Conforms to NEMA Type 3R.
Raintight Trough—NEMA Type 3R
Raintight trough is designed for ganging meter devices, panelboards, switches, and circuit breaker enclosures. Each length is a completely enclosed section with a removable cover that has provisions for sealing.
Design: 4” and 6” wireway is constructed of 16 gauge galvanized steel. 8”, 10”, and 12” wireway is constructed of 14 gauge galvanized steel. All raintight troughs conform to NEMA Type 3R.
Finish: ANSI-49 gray polyester powder finish over a corrosion resistant phosphate preparation. All raintight troughs are Underwriters Laboratories listed as steel enclosed wireway and auxiliary gutter (horizontal mounting only).