Wiser Flush-mounted Thermostat 2 A

The Wiser Flush-mounted Thermostat 2 A (hereinafter referred to as cFMT / thermostat) is mainly used for water-based heating and cooling applications, such as water-based underfloor heating and radiator heating.

Refer to the installation instruction supplied with this product.

You can preset the thermostat on the first power-on or immediately after a factory reset. The thermostat will require the selection of a preset to pre-configure settings depending on what the thermostat is directly controlling, which allows the thermostat to function correctly for the intended use case. Preset selection is a manual process and all preset uses a PI control algorithm which provides highly stable results.

Using the Wiser app, pair your thermostat with the Gateway/Hub to access and control it. You can either pair the device manually or do an auto-scan.

The control panel of the thermostat(s) allows you to view and adjust the temperature and access various settings.