Exxact – Connected Wireless Switch 1-gang/2-gang – Wiser Home Device user guide PDF
DUG_Exxact_Wireless Switch_WH-03

Exxact – Connected Wireless Switch 1-gang/2-gang


WDE002906
WDE002924
  1. For your safety
  2. About the device
    The Connected Wireless Switch 1-gang/2-gang (hereinafter referred to as Wireless switch) is a battery-powered Wireless switch that is used to control a group of Zigbee devices (such as light/shutter) within the same Zigbee network.
  3. Installing the device
    Refer to the installation instruction supplied with this product.
  4. Changing the device from 1-gang to 2-gang
  5. Quick Home Connect
    Quick Home Connect is a wireless connectivity solution for Zigbee devices without the need for a Hub/Gateway or smartphone application. Quick Home Connect is your starting point for wireless home automation. It performs functions like switching, dimming and shutter control using the Connected Wireless Switch (hereinafter referred to as Wireless switch) via a Zigbee network.
  6. Pairing the device with the Wiser Hub
    Using the Wiser Home app, pair your Wireless switch with the Wiser Hub to access and control the Wireless switch.
  7. Configuring the device
    Using the Wiser home app, you can configure the device according to your preferences.
  8. Using the device
    The Device Control Screen allows you to configure an Action/Moment to the Wireless switch and control various settings.
  9. Replacing the battery
    Replace the device battery when the level is low or critically low. The battery level can be seen in the app.
  10. LED indications
  11. Troubleshooting
  12. Technical Data
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?

Contact Information
Legal Information
Privacy Policy
Change your cookie settings