Odace - Connected Multiwire Universal Push-button Dimmer LED – Wiser Home Device user guide PDF
DUG_Odace Multiwire Push-button Dimmer_WH-00

Odace- Connected Multiwire Universal Push-button Dimmer LED


S920522
S940522
  1. For your safety
  2. About the device
    The Connected Multiwire Universal Push Button Dimmer LED (hereinafter referred to as dimmer) is a push-button device that can be used to switch and dim LED, ohmic, inductive or capacitive loads manually or remotely.
  3. Installing the device
    Refer to the installation instructions supplied with this product.
  4. Quick Home Connect
    Quick Home Connect is a wireless connectivity solution for Zigbee devices without the need for a Hub/Gateway or smartphone application. Quick Home Connect is your starting point for wireless home automation. It performs functions like switching, dimming and shutter control using the Connected Wireless Switch (hereinafter referred to as Wireless switch) via a Zigbee network.
  5. Pairing the device with the Wiser Hub
    Using the Wiser Home app, pair your dimmer with the Wiser Hub to access and control the dimmer.
  6. Configuring the device
    Using the Wiser Home app, you can configure the device according to your preferences.
  7. Using the device
    The Device Control Screen allows you to switch ON/OFF, adjust the brightness level and control various settings.
  8. Resetting the device
    You can reset the device to factory default manually.
  9. LED Indication
  10. Troubleshooting
  11. Technical Data
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?

Contact Information
Legal Information
Privacy Policy
Change your cookie settings