Search Results: setting tariff

, select Micromodule dimmer. Tap (D) to turn on. Drag the sliding bar up/down to increase/decrease the brightness (E) and tap Set on the upper right corner. After setting all conditions, tap Save. Once the moment is saved, it will appear on the Moments tab. Tap on the moment to enable it. If you want to see the created moments on the Home screen, go to Home > > Home Screen > Moments and enable the Momentstoggle switch.

device to the Moment, you can reverse the change of the Climate device by tapping Cancel all overrides. If a device follows a Schedule, the Moment of that device will only last to the next scheduled setting. Moments can also be assigned to push buttons of specific devices (e.g. Connected Wireless

Name: Tap to change the name of the device. For more information, refer to Renaming the device. B Location: Tap to assign the Device to any room (such as living room, bedroom, kitchen etc). Refer to Setting the device location for more details on how to set the location. C Identify: Tap to identify

. Setting (Default state) Status LED Indication Description The Red LED glows. The Red LED glows when the output is switched ON. All the LEDs are OFF. The LEDs are OFF, when the output is OFF. Alarms Status LED Indication Description Blinking red fast When there is an overload or over temperature alarm and

-right screen. After setting all conditions, tap Save. Once the moment is saved, it will appear on the Moments tab. Tap on the moment to enable it. If you want to see the created moments on the Home screen, go to Home > > Home Screen > Moments and enable the Moments toggle switch. You can also rearrange the moments by tapping Edit from the Moments tab on the Home screen, or by tapping Automation > Moments > Reorder.

-right screen. After setting all conditions, tap Save. Once the moment is saved, it will appear on the Moments tab. Tap on the moment to enable it. If you want to see the created moments on the Home screen, go to Home > > Home Screen > Moments and enable the Moments toggle switch. You can also rearrange the moments by tapping Edit from the Moments tab on the Home screen, or by tapping Automation > Moments > Reorder.

Name: Tap to change the name of the device. For more information, refer to Renaming the device. B Location: Tap to assign the Device to any room (such as living room, bedroom, kitchen etc). Refer to Setting the device location for more details on how to set the location. C Identify: Tap to identify

-right screen. After setting all conditions, tap Save. Once the moment is saved, it will appear on the Moments tab. Tap on the moment to enable it. If you want to see the created moments on the Home screen, go to Home > > Home Screen > Moments and enable the Moments toggle switch. You can also rearrange the moments by tapping Edit from the Moments tab on the Home screen, or by tapping Automation > Moments > Reorder.

sensor which is assigned to the same room as room thermostat. To change the UFH channel room refer Assigning a channel to the room. Only one UFH floor sensor can be assigned to a room if you want to update refer Setting Floor Sensor Location. Tap Submit to complete the pairing process. After you

Name: Tap to change the name of the device. For more information, refer to Renaming the device. B Location: Tap to assign the Device to any room (such as living room, bedroom, kitchen etc). Refer to Setting the device location for more details on how to set the location. C Identify: Tap to identify