Search Results: Away Mode

Showing 661 - 670 of 1,175 results

Page 67 of 118

  • Affichages LED

    Capteur de température/humidité Wiser – Guide de l’utilisateur de l’appareil Wiser Home

    Affichages LED Affichages LED Affichages LED Appairage Action de l’utilisateur Affichage LED État Appuyez 3 fois sur la touche de fonction. La LED clignote en orange une fois par seconde. Le mode d’appairage est actif pendant 30 secondes. Une fois l’appairage terminé, la LED s’allume en vert

  • LED indications

    Wiser Temperature/Humidity Sensor – Wiser Home Device user guide

    LED indications LED indications LED indications Pairing User Action LED Indication Status Press the function key 3 times LED blinks amber, once per second. Pairing mode is active for 30 seconds. When pairing is completed, LED glows green for some time before turning Off. Resetting User Action LED

  • Troubleshooting

    Wiser Home – System User Guide (Spain and Portugal)

    use devices listed in List of Wiser Devices. The device is not able to connect with the Hub /Hub R. After pressing 3 times, the device LED blinks amber for 30 s. Pairing mode has changed. Press the Reset button on the device 3 times then hold for 20 s, until the LED blinks red. The device should

  • Technical data

    ARGUS Motion Sensor Outdoor 360 – Wiser Home Device user guide

    . LED load Max. number of LED lamps -20 °C to 45 °C 10 A 300 W 15 45 °C to 50 °C 8 A 300 W 15 50 °C to 55 °C 6 A 300 W 15 Relative humidity 0 % to 95 %, non condensing Lux setting 1 lx to 2000 lx, Day mode Night mode Sensitivity setting 1 – 6 (50 % - 100 %) Dimensions Ø 82 mm x 107 mm Ø 82 mm x 131 mm with corner bracket Compliance Communication protocol Zigbee ® 3.0 (certified)

  • Modo de conforto

    Wiser Home – Guia do Utilizador do Sistema (Espanha e Portugal)

  • Affichages de la LED

    Mureva EVlink – Guide d’utilisation de l’appareil

    Affichages de la LED Affichages de la LED Affichages de la LED Appairage de l’appareil Action de l’utilisateur Affichage de la LED État Appuyez 3 fois sur le bouton-poussoir. La LED clignote en orange une fois par seconde. Le mode d’appairage est actif pendant 30 secondes. Une fois l’appairage

  • Adjusting the brightness on the dimmer

    Wiser Multiwire Micro Module LED Dimmer – Wiser Home device user guide

    switch with Multiwire micro module dimmer. Press and hold the left mechanical push button for 15 s. The dimmer LED blinks green and then the connected load blinks till the settings mode is confirmed. Refer to the following sections for minimum and maximum brightness settings. Some lamps have a

  • Troubleshooting

    Wiser Home – System User Guide (Germany, Austria)

    use devices listed in List of Wiser Devices. The device is not able to connect with the Hub. After pressing 3 times, the device LED blinks amber for 30 s. Pairing mode has changed. Press the Reset button on the device 3 times then hold for 20 s, until the LED blinks red. The device should reboot into

  • Troubleshooting

    Wiser Home – System User Guide (Belgium)

    use devices listed in List of Wiser Devices. The device is not able to connect with the Hub. After pressing 3 times, the device LED blinks amber for 30 s. Pairing mode has changed. Press the Reset button on the device 3 times then hold for 20 s, until the LED blinks red. The device should reboot into

  • Troubleshooting

    Wiser Home – System User Guide (Denmark)

    use devices listed in List of Wiser Devices. The device is not able to connect with the Hub. After pressing 3 times, the device LED blinks amber for 30 s. Pairing mode has changed. Press the Reset button on the device 3 times then hold for 20 s, until the LED blinks red. The device should reboot into
Page 67 of 118