About the device
The Wiser Smoke Alarm 240 V uses a photoelectric sensor to detect smoke generated by fire. It also includes a backup battery that allows the device to work if the power supply is disconnected. When connected to the Wiser system, the device will send notifications via the Wiser app.
Operating elements
-
Status LED (Amber, Green and Red LED)
-
Standby LED (Red LED)
-
Test/Hush button
-
Setup/Reset button
-
Power switch
Installation location
-
Smoke Alarm can be installed on a flat/inclined ceiling, or on the wall.
-
Do not install smoke alarms near windows, doors, or ducts.
-
Avoid paint, stickers, or other decorations.
