ELKO - Smart Smoke Alarm Battery – Wiser Home Device user guide PDF
DUG_Smart Smoke Alarm Battery_WH-00

ELKO - Smart Smoke Alarm Battery


EKO09761
  1. About the device
    The Smart Smoke Alarm Battery (smoke alarm) uses a photoelectric sensor to detect smoke generated by fire. It also includes a temperature sensor that detects heat caused by rapid increase in temperature. When connected to the system the device sends the notifications via the Wiser app.
  2. Installing the device
    Refer to the installation instruction supplied with this product.
  3. Pairing the device with the Wiser Hub
    Using the Wiser Home app, pair your smoke alarm with the Wiser Hub.
  4. Setting up connection without Wiser Hub
  5. Testing the device
  6. Configuring the device
  7. Using the device
    The Control Panel of the smoke alarm allows you to view the current state of the smoke alarm and allow you to access the history and settings.
  8. Removing the device
    Using the Wiser Home app, you can remove the smoke alarm from the Wiser system.
  9. Resetting the device manually
  10. Maintenance and cleaning
    A monthly inspection is recommended to help ensure the smoke alarm is dust, dirt, and insect free. The smoke alarm can be vacuumed (strongly recommended) or brushed with a soft brush to remove accumulated dust, dirt or kitchen grease. Apply a small amount of insect surface spray to a cloth and wipe around smoke alarm(s) every 3 to 6 months to mitigate insect ingress.
  11. LED indications
  12. Troubleshooting
  13. Technical Data
Feedback
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.
Contact Information
Legal Information
Privacy Policy
Change your cookie settings