LED Indication
Pairing
|
User Action |
LED Indication |
Status |
|
Press the push button 3 times |
LED blinks amber per second.  |
Pairing mode is active for 30 seconds. When pairing is completed, LED glows green for some time before turning Off.  |
Resetting
|
User Action |
LED Indication |
Status |
|
Press the push button 3 times and hold it down once for > 10 s. |
After 10 s, the LED blinks red.  |
The device is in reset mode. It is reset to the factory settings after 10 seconds. The device then restarts and the LED blinks green for a few seconds and then stays amber.  |
Identifying the device
|
LED Indication |
Status |
|
The LED blinks red. |
The shutter opens/closes gradually, upon successful identification of the Blind control switch. |
Different connectivity mode
|
LED Indication |
Status |
|
The LED blinks green and red while paring.  |
The device is
trying to connect to other connectivity mode.  |