LED Indication
Pairing
|
User Action |
LED Indication |
Status |
|
Press the push-button 3 times |
LED blinks orange
for Zigbee. LED
blinks red green, for Bluetooth. |
Pairing mode is active for 30 seconds. When pairing is completed,
LED glows green for some time before turning off. |
Changing protocol
|
User Action |
LED Indication |
Status |
|
Short press the push-button 3 times and long press once for > 20 s. |
LED blinks red
rapidly indicating commence of protocol change. |
On successful
change in protocol:
|
Resetting
|
User Action |
LED Indication |
Status |
|
Press the push-button 3 times and long press once for > 10 s. |
After 10 s, the LED blinks red.  |
For Zigbee,
the device is reset to the factory settings after 10 seconds. The
device then restarts and the LED blinks orange indicating that it
is ready for pairing. For Bluetooth, the device is reset to the factory settings after 10 seconds and the device turns off. |
LED Indicator Mode
|
Load Status |
ON |
OFF |
|
Reverse with load |
No LED |
White LED is on |
|
Consistent with load |
White LED is on |
No LED |
|
Always Off |
No LED |
No LED |
|
Always On |
White LED is on |
White LED is on |