LED Indications
Initial Stage
|
Action |
LED Indication |
Status |
|
Green LED blinks 7 times (1 Hz) |
→ (7x)
→
|
After the sensor is powered On for the first time or after the batteries were replaced. |
If not paired yet
|
Action |
LED Indication |
Status |
|
Amber LED blinks (1 Hz) |
→ (2 min)
→
→ (3 sec)
→
|
Indicates the pairing mode after function key is pressed 3 times within 1 second. If pairing is not successful, the amber LED is On for 3 seconds and then turns Off. |
|
Green LED is On for 3 seconds |
→ (3 sec)
→
|
Pairing was successful. |
If already paired
|
Action |
LED Indication |
Status |
|
Green LED blinks 5 times (1 Hz) |
→ (5x)
→
|
The sensor is paired and connected. |
|
An amber LED blinks for three seconds (4 Hz) |
→ (3 sec)
→
|
The sensor is paired, but disconnected. |
Reset - After pressing the function key 3 times within 0.5 seconds and then hold for 10 seconds
|
Action |
LED Indication |
|
The red LED blinks for 10 seconds, remains on for 3 seconds, and then turns off. The sensor then restarts and blinks green for a few seconds. |
→ (10 sec)
→
→ (3 sec)
→
→
|
Battery level
|
LED Indication |
Status |
|
LED blinks amber once per minute.
|
The battery is low (< 10%), replace the battery. NOTE: A notification pop-up
will appear on the app.
|