990–5939–001

Connect the Power Cables from the UPS

DANGER
hazard of electric shock, explosion, or arc flash
Do not drill or punch holes with the gland plates installed and do not drill or punch holes in close proximity to the cabinet.
Failure to follow these instructions will result in death or serious injury.
  1. Lockout/Tagout the battery breaker in the OFF position.

    Front View of the Empty Classic Battery Cabinet

    Front View of the Empty Classic Battery Cabinet

  2. Connect the PE cable.
  3. Connect the DC cables (DC+, N, DC-) from the UPS.
  4. Install the protection cover over the terminals on the left side of the battery breaker.
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?