ELKO - SmartDim Multiwire Universal LED Push – Wiser Home Device user guide PDF
DUG_SmartDim MW Push_WH-00

ELKO - SmartDim Multiwire Universal LED Push


EKO07274, EKO07275, EKO07276

EKO07277, EKO30197
  1. About the device
    The SmartDim Multiwire Universal LED Push (hereinafter referred to as dimmer) is a push-button device that can be used to switch and dim LED, ohmic, inductive or capacitive loads manually or remotely.
  2. Installing the device
    Refer to the installation instruction supplied with this product.
  3. Quick Home Connect
    Quick Home Connect is a wireless connectivity solution for Zigbee devices without the need for a Wiser Hub or smartphone application. Quick Home Connect is your starting point for wireless home automation. It performs functions like switching, dimming and shutter control using the Connected Wireless Switch (hereinafter referred to as Wireless switch) via a Zigbee network.
  4. Pairing the device with the Wiser Hub
    You can pair your dimmer with the Wiser Hub to access and control the dimmer.
  5. Configuring the device
    The Device Details screen allows you to configure the device settings according to your preferences.
  6. Using the device
    The Device Control Screen allows you to switch on/off, adjust the brightness level and control various settings.
  7. Resetting the device
    You can reset the device to factory default manually.
  8. LED Indication
  9. Troubleshooting
  10. Technical Data
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?

Contact Information
Legal Information
Privacy Policy
Change your cookie settings