Resetting the device
You can reset the device to factory default manually.
-
Short press the push button
3 times and then long press the push button once for 10 s.
-
After 10 s, LED starts blinking red, then release the push-button.
NOTE: All configuration data, user data, and network data are deleted. After which
-
No connectivity to other devices or rooms.
-
Memory function is active.
-
Automatic load detection is active, RC mode is set.
-
Dimmer settings will reset to default.
The LED stops blinking upon successful reset of the device.
The module restarts and blinks green for a few seconds. -