Viewing and configuring cellular network information using ION Setup
You can view information relating to your service provider’s
cellular network through ION Setup. There are also some settings you can configure.
- Start ION Setup.
- Open the Setup Assistant for your meter.
- Navigate to .
| Setting | Description | Read/write |
|---|---|---|
| IP Address | Displays the TCP/IP address assigned to the meter1 | Read |
| MEID/CCID | Displays the SIM card number or MEID (CDMA) | Read |
| Signal Strength | Displays the cellular signal strength in decibel-milliwatt (dBm) | Read |
| IMEI | Displays the International Mobile Equipment Identifier | Read |
| Allow Roaming | This specifies whether the device is allowed to roam on a different service provider if it is outside their cellular network service provider’s coverage | Read/write |
| APN | Enter the Access Point Name if requested by the cellular network service provider | Read/write |
| Network | Displays the current network and cellular service provider | Read |
| 1 Only IPv4 addresses are supported. | ||
NOTE: Not all settings are available for all meters.