Configuring the device
- On the Home screen, tap
.
- Tap to locate to the Device Details screen.TIP: You can also navigate by tapping Control > Select the device >
> Device Settings.
A
Device Name: Tap to change the name of the device. For more information, refer to Renaming the device topic.
B
Location: Tap to assign the Device to any room (such as living room, bedroom, kitchen etc). For more information, refer to Selecting the device location.
C
Identify: Tap to identify the device. The status LED blinks red and connected lighting devices blinks on/off, upon successful identification of the switch.
Tap OK when you finish identifying the device. For more information, refer to Identifying the device.D
Delete: Tap to remove the device from the system.
NOTE:-
Removing the device will also reset the puck. After reset, the LED turns amber indicating that the puck is ready for pairing.
-
If there is a problem while pairing or resetting the switch, refer to Resetting the device.
E
Zigbee Signal Strength Indicator: Zigbee Signal Strength indicator which displays the current signal strength of the device.
-
Good Signal (between 0 &
-54dBm) -
Normal Signal (between -54
& -79dBm) -
Poor Signal (<-79dBm) -
No Signal (device is offline)
-