Connect the Signal Cables
 DANGER |
|---|
|
hazard of electric shock, explosion, or arc flash
Do not drill or cut holes for cables or conduits with
the gland plate installed and do not drill or cut holes in close proximity
to the modular battery cabinet.
Failure to follow these instructions will result in death or serious injury.
|
NOTE: Route the signal cables separately
from the power cables.
-
Remove the indicated rubber cover. Cut holes for signal
cables.
-
Connect 22 AWG signal cables (not supplied) according to
one of the diagrams below.
Signal Cables in Systems with One Modular Battery Cabinet
Signal Cables in Systems with up to Four Modular Battery Cabinets
-
Route the power and signal cables through conduits or fasten
to the cable reliefs.
