mount the handle to the flange of the enclosure. Two flange mounting methods are offered. For right or left hand flange mounting use Types A1–A4 and Types A9–A10 kits. For right-hand mounting only, use Type A5–A8 handles. The type AP1 and AP2 handles are used on the PowerPacT™ M and P operating

Front Embossed mounting holes add a 0.25 inch standoff to back of MH box. Enclosure 20"W x 6.5"D Height (In.) Catalog No. Catalog No. “CU” suffix indicates copper bussing. NQOD RTI interiors with aluminum bus are no longer available. Order copper bussed equivalent with a “CU” suffix when

Duty Heavy duty applications requiring an overload up to 150% for 60 seconds. Typical for constant torque loads. Catalog Number Three-phase Motor Power These values are given for a nominal switching frequency of 4 kHz up to ATV630D45N4, or 2.5 kHz for ATV630D55N4...D90N4 for use in continuous

/O. It includes enough processor power for integration of many IED’s as well as intelligent embedded applications and logic functions. Each SAGE RTU provides the same browser-based user interface for easy configuration and setup. Each RTU offers IED integration, NERC CIP security, IEC 61131-based

. The charts apply to Square D brand load side breakers only. However, the line side fuse ratings are independent of the fuse manufacturer. Not applicable to Corner Grounded Systems. Limiters used in Square D brand DSL and DSL II fused power circuit breakers are not class L fuses and do not have series ratings.

efficient engineering and commissioning. Easergy MiCOM P14x Feeder Management and Overcurrent Protective Relays are especially suitable where a complete or advanced power system protection scheme solution is required. The following models are available: Easergy MiCOM P141 – Feeder management relay

Neutral Undervoltage ● ● 32P Directional Power ● ● ● ● ● ● 32Q/40/55 Directional Reactive Power ● ● ● ● 37 Phase Undercurrent ● ● ● 38 Bearing Temperature ● ● ● ● ● ● 40 Loss of Excitation ● ● ● ● 46 Negative Sequence Current/Unbalance ● ● ● ● ● ● ● ● ● 47 Negative Sequence Undervoltage

applications requiring an overload up to 150% for 60 seconds. Typical for constant torque loads. Catalog Number Three-phase Motor Power These values are given for a nominal switching frequency of 4 kHz up to ATV930D45N4, or 2.5 kHz for ATV930D55N4...D90N4 for use in continuous operation. The switching

your automation system through five major communication protocols. TeSys T predicts what will happen in the process, as it accurately monitors current, voltage, and power over a wide range. TeSys T is a green motor management system with unique power monitoring capabilities for better energy management

% Power Factor Resistive 75% Power Factor Make, Break and Continuous Amperes Inductive and Resistive (NEMA Q600) Make Break Continuous Carrying Amperes Make and Break Continuous Carrying Capacity Amperes VA Amperes VA KA1 KA2KA3 KA4 KA5KA6 120 60 7200 6.0 720 10 10 125 0.55 0.55 — — 2.5 240 30 3.0