DOCA0176EN-09

About the Document

Document Scope

This document provides the firmware version history of Service Interface.

Use this document to determine whether an update to the latest version of the Service Interface is relevant for your application.

Validity Note

This document applies to Service Interface used with MicroLogic trip units mounted in the following low voltage circuit breakers:

  • MasterPacT™ NT/NW circuit breakers

  • EasyPacT™ MVS circuit breakers

  • ComPacT™ NS circuit breakers

  • PowerPacT P- and R- frame circuit breakers

  • ComPacT™ NSX circuit breakers

  • PowerPacT H-, J-, and L-frame circuit breakers

NOTE:
  • The information related to the new generation of ComPacT NSX and PowerPacT H-, J-, and L-frame circuit breakers in this guide applies to the existing range ComPact NSX and PowerPact H-, J-, and L-frame circuit breakers also. The exceptions are mentioned wherever applicable.

  • The information related to the new generation of ComPacT NS and PowerPacT P- and R-frame circuit breakers in this guide applies to the existing range ComPact NS and PowerPact P- and R-frame circuit breakers also. The exceptions are mentioned wherever applicable.

Online Information

The characteristics of the products described in this document are intended to match the characteristics that are available on www.se.com. As part of our corporate strategy for constant improvement, we may revise the content over time to enhance clarity and accuracy. If you see a difference between the characteristics in this document and the characteristics on www.se.com, consider www.se.com to contain the latest information.

General Cybersecurity Information

In recent years, the growing number of networked machines and production plants has seen a corresponding increase in the potential for cyber threats, such as unauthorized access, data breaches, and operational disruptions. You must, therefore, consider all possible cybersecurity measures to help protect assets and systems against such threats.

To help keep your Schneider Electric products secure and protected, it is in your best interest to implement the cybersecurity best practices as described in the Cybersecurity Best Practices document.

Schneider Electric provides additional information and assistance:

Product Related Cybersecurity Information

WARNING
POTENTIAL COMPROMISE OF SYSTEM AVAILABILITY, INTEGRITY, AND CONFIDENTIALITY
  • Change default passwords at first use to help prevent unauthorized access to device settings, controls, and information.
  • Disable unused ports/services and default accounts to help minimize pathways for malicious attackers.
  • Place networked devices behind multiple layers of cyber defenses (such as firewalls, network segmentation, and network intrusion detection and protection).
  • Use cybersecurity best practices (for example, least privilege, separation of duties) to help prevent unauthorized exposure, loss, modification of data and logs, or interruption of services.
Failure to follow these instructions can result in death, serious injury, or equipment damage.

Environmental Data

For product compliance and environmental information, refer to the Schneider Electric Environmental Data Program.

Related Documents for IEC Devices

The following table lists documents for IEC devices compatible with the Service Interface with the latest firmware version.

Title of documentation

Publication date

Reference number

Service Interface - Instruction Sheet

01/2023

GDE78167

Service Interface for MasterPacT NT/NW, ComPacT, PowerPacT, and EasyPacT Circuit Breakers - User Guide

02/2025

MasterPacT NT - Circuit Breakers and Switch-Disconnectors from 630 to 1600 A - User Guide

04/2016

MasterPacT NW - Circuit Breakers and Switch-Disconnectors from 800 to 6300 A - User Guide

06/2022

MasterPacT NT/NW - Circuit Breakers and Switch-Disconnectors - Maintenance Guide

12/2020

MasterPacT NT/NW - Basic and Standard End-User Maintenance Procedures

06/2022

ComPacT NS - MicroLogic Trip Units - User Guide

01/2022

ComPacT NS - MicroLogic A/E Trip Units - User Guide

01/2022

ComPacT NS - MicroLogic P Trip Units - User Guide

01/2022

ComPacT NS - Circuit Breakers and Switch-Disconnectors - User Guide

02/2025

ComPacT NSX - Circuit Breakers and Switch-Disconnectors - User Guide

06/2024

ComPacT NSX - MicroLogic 5/6/7 Electronic Trip Units - User Guide

06/2024

EasyPacT MVS - User Manual

07/2023

MVS21734

You can download these technical publications and other technical information from our website at www.se.com/ww/en/download/.

Related Documents for UL/ANSI Devices

The following table lists documents for UL/ANSI devices compatible with the Service Interface with the latest firmware version.

Title of documentation

Publication date

Reference number

Service Interface - Instruction Sheet

01/2023

GDE78167

Service Interface for MasterPacT NT/NW, ComPacT, PowerPacT, and EasyPacT Circuit Breakers - User Guide

02/2025
MasterPacT NT Low-Voltage Power/Insulated Case Circuit Breaker - User Guide 06/2015
MasterPacT NW Low-Voltage Power/Insulated Case Circuit Breaker - User Guide 06/2015
PowerPacT R -Frame Circuit Breakers - Instruction Bulletin 06/2023
PowerPacT P -Frame Circuit Breakers - Instruction Bulletin 06/2023
PowerPacT P -Frame Drawout Circuit Breakers - Instruction Bulletin 06/2023

PowerPacT H-, J-, and L-Frame Circuit Breakers with MicroLogic Trip Units - User Guide

04/2025

You can download these technical publications and other technical information from our website at www.se.com/ww/en/download/.

Information on Non-Inclusive or Insensitive Terminology

As a responsible, inclusive company, Schneider Electric is constantly updating its communications and products that contain non-inclusive or insensitive terminology. However, despite these efforts, our content may still contain terms that are deemed inappropriate by some customers.

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?