Configuring the device

You can rename the device using the Wiser Home app.

Using the Wiser Home app, you can assign the Relay in the room (such as bedroom, living room, dining room etc.).

Using the Wiser Home app, you can control the electrical heaters or electric underfloor heating by selecting Relay or Pilot Wire.

Using the Wiser Home app, you can select the type of floor sensor that you have installed in case of using electric underfloor heating. The floor sensor measures the floor temperature and displays in the app. This option appears only if you have selected the Relay as Control Type.

Using Wiser Home app, the Floor Sensor Offset option allows you to calibrate the floor sensor to match the actual temperature measured by an external device.

Using the Wiser Home app, you can switch on/off the electrical underfloor heater by setting lower/upper temperature limit. This allows you to maintain the floor temperature within the set limits.

Using the Wiser Home app, you can identify the Relay from the other available devices in the room.