Entering Screen Access Codes

If an access code is required, follow these steps to enter an access code:

1. From the MAIN MENU screen, select ACCESS.

   The ACCESS LOGIN screen displays:

   

2. Position the cursor over each digit location (*), using the + or - key to increase or decrease the number to enter the assigned 4-digit access code.

   

3. Save the code entry by moving the cursor to the exit ACCESS CODES arrow (<) at the top of the screen.

   The entered access code is compared to the access code table, and the assigned login level is displayed.

   
   NOTE: A five-minute timer restarts every time a key is pressed. When this timer expires, the entered access code is cleared and the user is logged out.