For your safety

DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Safe electrical installation must be carried out only by skilled professionals. Skilled professionals must prove profound knowledge in the following areas: Connecting to installation networks Connecting several electrical devices. Laying electric cables. Safety standards, local wiring rules and regulations. Failure to follow these instructions will result in death or serious injury.

DANGER

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH

Safe electrical installation must be carried out only by skilled professionals. Skilled professionals must prove profound knowledge in the following areas:

Connecting to installation networks
Connecting several electrical devices.
Laying electric cables.
Safety standards, local wiring rules and regulations.

Failure to follow these instructions will result in death or serious injury.

DANGER
RISK OF FATAL INJURY FROM ELECTRIC SHOCK The output may carry electrical current even when the load is switched off. Disconnect the device from the supply by means of the fuse in the incoming circuit before working on the device. Failure to follow these instructions will result in death or serious injury.

NOTICE
HAZARD OF CONDUCTOR DAMAGE For installations with loads of 16 A a minimum of 2.5 mm² conductor should be used. When inserting the conductors into the connector blocks make sure that the screws are tightened. Failure to follow these instructions can result in equipment damage.

NOTICE
RISK OF DAMAGE TO DEVICE Always operate the product in compliance with the specified technical data. Failure to follow these instructions can result in equipment damage.