Wiser 4 Channel Automation Relay (Wiser) – Device user guide PDF
DUG_4 Channel Automation Relay-00

Wiser 4 Channel Automation Relay


IH14000100

  1. For your safety
  2. About the device
    Wiser 4 channel automation relay is a miniature micro module (hereinafter referred to as Puck), which is remotely controlled and designed to operate in AC mains. In AC mains, it operates with common neutral lead. Four relay switches enable ON/OFF control of regular loads. It also has the capability of mixing its internal relays to support high wattage load like air conditioners and geysers. The relay switch also operates as a repeater within the Z-Wave network to which it is associated, and uses the latest Z-Wave plus chips.
  3. Installing the device
    Refer to the installation instruction supplied with this product.
  4. Pairing the device with the Wiser Hub
    Using the Wiser app, you can pair your 4 channel relay puck with the Wiser Hub to access and control the relay switches.
  5. Configuring the device
    Using the Wiser app, you can configure the device according to your preference.
  6. Using the device
    The Device Control Screen allows you to switch ON/OFF the device and control various settings.
  7. Removing the device
    Using the Wiser app, you can remove a device from the device list.
  8. Resetting the device
    You can reset the device to factory default manually.
  9. LED indication
  10. Troubleshooting
  11. Technical data
Feedback
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.
Contact Information
Legal Information
Privacy Policy
Change your cookie settings